ICE

	This was done a while ago. But a decent headunit was fitted using the brackets from the original Japanese spec. radio/cassette.
	Halfords ordered me an adaptor cable to connect to an ISO headunit. Even than needed a modification - but I forget what.
	Original speaker on the right. Complete rotten. I took it into Halfords, they told me these Alpines would fit the front doors. They didn't - idiots - not close because they are 6.5" not 6" Lots of time with the die-grinder got them fitted, I'd not recommend them though, as they are hard to fit.
	I fitted a pair of 5.25" speaker from Boss Audio into the D-pillars. They were nice quality with separate tweeters and cross-over. A little bit of trimming was required, but I was expecting this is time around. Sound good in the back, but don't really project into the front.
	Harman Kardon have developed a neat iPod intergration solution. The Drive+Play. It costs about £30 from eBay. Gives a much better install than the typical wireless transmitter/cradle. But is much harder work to install, as its all wired.
	Here is the control wheel, along with the display, it echoes the interface of the iPod quite closely.