|
TOP
| |
Programming Features |
| |
High Speed
programming to manufactures certified specification.
Pre-Program checks are selectable
(empty check, bit check, or none).
Verify Margins can be modified
from approved algorithms to marginal conditions (+/- 10% deviation
from normal).
Security Lock (sector protect)
will disable both program and erase operation in any number of
available sectors for in-circuit programmable devices.
Device Check for correct
insertion and faults.
Bus Isolation for data integrity
with 208 drivers built in.
Turbo Charge
Modes in addition to the inherent high speed two features are
embodied: |
| |
Skip - where the
programmer does not attempt to program empty locations.
Memory Mapping -
which allows areas of the programmable device not used to be
excluded from the program, erase and verify field, thereby
increasing throughput proportionally. |
| |
Support |
| |
4 sockets in gang
or set and up to eight sockets in gang mode depending on plug in
module.
EPROMS, EEPROMS,
FLASH, Serial EPROMS, and Microcontrollers.
Package Types DIP
and PLCC (no third party adaptors required).
Low Voltage
Technologies - all voltages from 2.0V up to 7.0V enabling support of
2.4V and 3.3V technologies.
8, 16 and 32 bit
modes. |
| |
Operating Benefits |
| |
User set-up restored on power up.
Low cost of ownership and low cost module configurations.
Memory device data editing tools include:
List or Change Data.
Insert/delete Bytes.
Fill Ram.
Block Move.
String Search.
Edit functions can be locked out for production use. |
|
High Speed Data Transfer |
| |
Optional Parallel Interface - high speed standard IEEE 1284 parallel
port giving enhanced bi-directional communication. Download speed is
further enhanced by DMA.
Supplied with StagCom95 and cable. |
Device Support
EPROMS, EEPROMS, Serial EPROMS, FLASH and Microcontrollers.
Processor
32 bit Embedded RISC Microcontroller with cache memory.
Memory
4 Mbytes (32Mbits) standard. 16 Mbytes (128Mbytes) expansion using
72 pin SIMMs.
Local interface
Display: 20 x 4 character alphanumeric back-lit LCD.
Keypad: Silicon rubber, tactile 23 keys including dedicated program
and cursor buttons.
I/O Port
Serial RS232 port with Baud rate selection 1200, thru 115200.
Programmable stop bit. Hardware handshaking protocol.
Data transfer to and from all platforms including PC, VAX, SUN,
Macintosh.
I/O format selection includes: ASCII, HEX Space, binary, binary
rubout, Intel 32 bit, Motorola S-Record, Stag binary, Stag Hex,
Extended TEK-Hex.
Dimensions
440 x 260 x 130mm. (17.2 x 10.4 x 5.2").
Weight
500g. (1.1lb).
TOP
Power
90-263VAC 40-70Hz 60W.
Environmental
EMC Emissions - Complies with EN 50081-1.
EMC Immunity - Complies with EN 50082-1.
Safety - Complies with EN 60950.
Temperature - Operating: 0-35°C.
|
