Stag's Quasar Plus PC based universal
programmer is designed for engineering or production use.
Interchangeable modules provide socketing for various device packages
including DIP, PLCC, TSOP, PSOP, QFP, PGA and BGA. Devices supported
include PROMs, EPROMs, FLASH, EEPROMs, PLDs, CPLDs & Microcontrollers.
Device libraries and algorithms are stored in software modules on the PC
allow easy user upgrades for new or changed algorithms.
Programmer Options
Two programmer options are available
tailored to your requirements.
The Quasar Plus model 1044 has a 44pin DIP
socket as standard and using the UPA-44 universal PLCC module can
support 44 pin PLCC devices. 44 pindrivers are available for programming
and testing devices. Larger devices may be supported depending on the
programming module.
The Quasar Plus model 1084 has a 44pin DIP
socket as standard and using the UPA-84 universal PLCC module can
support 84 pin PLCC devices. 84 pindrivers are available for programming
and testing devices. Larger devices may be supported depending on the
programming module.
Memory, Micros and Logic
As expected from a Stag Programmer the
Quasar Plus is feature rich and every area of programmable device
behaviour is covered.
For memory devices, 8 and 16-bit modes are
available as well as a full featured data editor.
All types of device security are
implemented: security fuses; encryption; software data protection; and
the software also provides an option for automatic device serial numbers
and checksums for memory type devices.
A full programming sequence can be defined
to fit the operator's requirements: Blank Check, Programming,
Verification and the blowing of security fuses.
The Quasar Plus accepts standard JEDEC
files from logic compilers, which provide all the necessary fuse data
and test vectors for programming and testing PLDs.
Universal Device Support
CMOS PROMs, BPROMs, EPROMs, FLASH, EEPROMs, Microcontrollers, PLDs,
EPLDs, GALs.
Pin Drivers
Model 1044 Entry level machine has 44 pin drivers as standard.
Model 1084 has 84 pin drivers.
PC Requirements
IBM 386/486/Pentium or compatible machine.
DOS 3.1 or above.
640K RAM minimum.
Hard disk with at least 1.5MB free disk space.
Uses standard parallel printer port.
Data Transfer
All popular file formats are supported including Intel Hex, ASCII,
Motorola S-Record, Binary, Extended Hex, JEDEC, and POF.
Dimensions
280mm x 320mm x 76mm (11" x 12.5" x 3").
Weight
Model 1044 2.8kg (6.0lb).
Model 1084 3.0kg (6.5lb).
TOP
Expansion Capability
Programming Units
UPA-44: Universal socket for upto 44 pin PLCC.
UPA-84: Universal socket for upto 84 pin PLCC.
For other device specific modules refer to the Device Support
List.
Power
85-264VAC 50W.
Environmental
EMC Emissions - Complies with EN 50081-1.
EMC Immunity - Complies with EN 50082-1.
Safety - Complies with EN 60950.
|
