|
IsoMec Technical Information IsoMec3D | Basic Collection | Supplementary Collection | Order Form Foxgrove Home | Newsletter | Updates | User Notes |
||||||||||||||||
|
Your computer system The minimum system requirements are the same as those published for CorelCAD™. Our recommended requirements are also listed below.
Disc space requirements The Basic Collection of IsoMec3D will require approximately 15Mb of disc space. The Supplementary Collection of IsoMec3D will require an additional 5.5Mb of disc space. |
In addition to allowing for disc space to store the 3D drawings of parts, you must also allow space in which to store the drawings that you will produce. The drawing of the motorcycle, fig.1, on the main IsoMec3D page takes about 1.6Mb of space in CCD format. Recommended printer(s) To produce printed output of an acceptable quality, you will need at least an inkjet colour printer with a minimum resolution of 300 d.p.i. (dots per inch). A monochrome laser printer can be used to produce very reasonable black and white output in grey-scales. |
|||||||||||||||
|
For more information please E-Mail foxgrove@btinternet.com Information on these pages is subject to change without notice and does not represent a commitment on the part of Foxgrove Design Studio. The IsoMec and IsoMec3D software described on these pages is furnished under a license agreement. © 1992, 1993, 1994, 1995, 1996, 1997 Foxgrove Design Studio. All rights reserved. All brand names, product names, trademarks and registered trademarks are recognised and acknowledged. Meccano® is a registered trademark of Meccano SA, Avenue de Saint Exupéry, 62100 CALAIS-FRANCE CorelDRAW!® and CorelCAD® are the registered trademarks of Corel Corporation, Canada. TURBOCAD™ is the registered trademark of IMSI, San Rafael, California, USA. |
||||||||||||||||