Instructions

Make sure that ALL Volumes are turned to ZERO before turning on any of the equipment.

1. Using the supplied leads connect the "speaker outs" of the amp to the inputs of the bass bins 

2. Using the short satellite leads connect the "Hi Out's" of the Bass bins into the "Inputs" of the Top Cabs. * These leads only work one way round:- "B" = Bass Cab "T" = Top Cab*.

*The Speakon connectors are "Keyed" and can only fit into the speakers one way. However they must be twisted clockwise until they "click" home. 

Connect the "Line Out" or "Master Out" L+R of the mixer into the "Inputs" of the amplifier.

Make sure that all volumes are down, and turn on the equipment.

It is now safe to turn the volumes up on the amp, and test out the system.

Back To Home Page