TL01
Quality Whitworth sizes 1/2" Sq. drive Chrome Vanadium socket set
3/16" to 5/8" Whitworth
Sold out - waiting for new stock

TL02
Quality Whitworth sizes 1/2" Sq. drive Chrome Vanadium socket set
1/8" to 1/2" Whitworth
Sold out – waiting for new stock

TL03
8 Piece Drop Forged Whitworth Sized Combination Spanner Set
1/8" to 9/16" Whitworth
Sold out – waiting for new stock

TL04
6 Piece Drop Forged Whitworth Sized Combination Spanner Set
1/8" to 7/16" Whitworth
Sold out – waiting for new stock

TL05
Am-Tech Vernier Gauge.
Outside and Depth measurement in
Metric 0 to 150mm and
Imperial - 0 to 6 inches
Price - £9.80 plus VAT if applicable

TL06
Rolson Torque Wrench.
1/2" Sq. Dr. Boxed. Range 0-150 lbs ft.
German Tuv approved
Complete with 3" extension bar and 1/2" to 3/8" Sq. reducer for smaller sockets.
Price - £ 21.00plus VAT if applicable

TL07
8 piece Set of Rolson Screwdrivers
High Visibility Handles.
5 x Flat blade 3/16" to 3/8" width
3 x Phillips blade No.1 & 2
Incredible price of only
£3.95 per set plus VAT if applicable

TL08
12 piece Blue Spot
Hex Bolt Drive Screwdriver Set
6 x Flat blade 3.2mm to 9.5mm
6 x Phillips blade No. 0 to No.4
You just cannot go wrong at
£8.90 per set plus VAT if applicable

TL09
36 Pc. Am-Tech 1/2" & 3/8"
Drive Impact AF socket set.
Metric & Imperial in Chrome Vanadium Drop Forged Heat-treated Steel.
From 5/16" to 1" AF and 8mm to 24mm in varying deep and shallow format.
Supplied with a 1/2" to 3/8" Reducer and blow moulded Storage Case.
A must for the Hinckley & Meriden
Triumph owner.
Price - £24.500 plus VAT if applicable

TL10
16 Piece AM-Tech
Chisel & Punch set
comprising
5 x parallel pin punches from 3/32" to 1/4"
5 x Taper punch also from 3/32" to 1/4"
3 x Cold Chisels from 3/8" to 5/8"
2 x centre punches
1 Chisel/Punch gauge
Price - £9.65 plus VAT if applicable

TL11
Am-Tech 9 piece Wobble
extension bar set
Heat treated, Hardened & Fully Polished
Chrome Vanadium Steel
1/4" drive 2", 4", 8"
3/8" drive 3", 6", 9"
1/2" drive 2", 5", 10"
Wobble type head for multi angle operation
Price - £12.50 plus VAT if applicable

TL12
29 piece Cased Screwdriver set
7 extra long screwdrivers -
flat 1.8, 2.4, 3.0, 3.5mm, Phillips 00, 0, 1
1 flexible extension with 14 bits
Star T10, T15, T20, T25, T27, T30, T40
Hex 2, 2.5 3, 4, 5, 5.5, 6mm
1 bits driver
6 Screwdrivers
Flat - 6x100mm, 4x75mm, 8x150mm, 3x75mm,
Phillips 1x75mm, 2x100mm
Price - £7.90 plus VAT if applicable

TL19
Metric 8 piece Hex / Allen Key Set
Blue Spot - new

Key sizes 1.5, 2, 2.5, 3, 4, 5, 6, 8 mm

Folds up neatly to pocket size

Made of Chrome Vanadium Steel for strength and durability

Comfort grip handles for torque
Price - £1.69 plus VAT if applicable

TL18
AF 9 piece Hex / Allen Key Set
Blue Spot - new

Key sizes 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, ¼ inch

Folds up neatly to pocket size

Made of Chrome Vanadium Steel for strength and durability

Comfort grip handles for torque
Price - £1.69 plus VAT if applicable

Other Specialist tools in stock

P155
EARLY TRIUMPH CAM PINION REM. & FITTING TOOL
£28.20 plus VAT if applicable

P170
NORTON CL/HUB-ENG SPR EXT
£7.00 plus VAT if applicable

P108
MAGNETO PINION EXTRACTOR
- £9.50 plus VAT if applicable

P179 or 67-9114
BSA A10 PUSH ROD COMB
- £2.10 plus VAT if applicable

P102 or 60-1859
UNIVERSAL 14MM T.D.C. GAUGE
- £8.60 plus VAT if applicable

P162
NOR/AMC CLUTCH EXTRACTOR
- £7.00 plus VAT if applicable

P156
NORTON PRE-COMMANDO CRANK DRIVE SPROCKET EXTRACTOR
- £6.50 plus VAT if applicable

P158A
TRIUMPH /NORTON CRANK T/S PINION EXTRACTOR – SPLINED TYPE
- £15.50 plus VAT if applicable

P158 or 61-6019
TRIUMPH / NORTON HALF TIME PINION EXTRACTOR
- £25.00 plus VAT if applicable

61-6016
TRIDENT SINGLE HOLE TAPPET BLOCK REMOVER.

(To be used in conjuction with 61-6008)
- £5.60 plus VAT if applicable

61-6021
MAIN BEARING EXTRACTOR DRIFT
- £26.08 plus VAT if applicable

61-7012
PRIMARY CHAIN ADJUSTER TOOL
- £2.90 plus VAT if applicable

61-6132
T140 CAMWHEEL PULLER
- £12.00 plus VAT if applicable

61-3135
T140 PISTON RING COMPRESSOR
- £10.34 each plus VAT if applicable

61-7010
T140 HEAD BOLT TORQUE ADAPTOR
- £2.05 plus VAT if applicable

61-6105
TRIDENT CLUTCH ALIGNMENT TOOL
- £6.50 plus VAT if applicable

61-7013
TRIUMPH POINTS OIL SEAL SPREADER
- £2.50 plus VAT if applicable

61-7014
TRIUMPH CLUTCH HUB EXTRACTOR
- £6.00 plus VAT if applicable

61-6113
UNIVERSAL BRITISH FORK ASSEMBLY & REMOVAL TOOL
£42.00 plus VAT if applicable

61-7022
TRIUMPH T140 TOP DEAD CENTRE TOOL
- £5.00 plus VAT if applicable

61-6017
TRIUMPH FORK OIL SEAL HOLDER Fitting & removal TOOL
- £23.50 plus VAT if applicable

61-6125
TRIUMPH 5 SPEED SPROCKET NUT SPANNER
- £31.50 plus VAT if applicable

CHAIN LINK EXTRACTOR
- Sold Out

HYDRAULIC CABLE OILER
- Sold out

T/Disc
190mm diam Universal Plastic Timing Disc
£5.20 + VAT if applicable

61-7011
TRIUMPH T140 5 SPEED GEARBOX QUADRANT LOCATION TOOL
- £24.50 plus VAT if applicable

61-6008
TRIUMPH TWIN TAPPET GUIDE BLOCK REMOVAL & INSERTION TOOL
£19.66 + VAT if applicable

VSC
Overhead Valve Spring Compressor
£19.90 + VAT if applicable

TRIUMPH TOOL KIT - £30.00 per set plus VAT if applicable 

We feel the set is overpriced for what you get so we no longer
keep the kits in stock but we can get them in to order.

The tools are in a pouch - Plastic or PVC - not leather - with the Triumph Logo on. However the tools included differ slightly from the ones in the original set
and the quality of the tools is not great.