Page: 1-2-3-4-5-6-7-8-9Print this page There are two possible basic circuits for installing
additional telephone sockets:
1 Spur wiring - where the adapter
connected to the master socket goes to a junction box and then each socket is
wired from the junction box (as below).
2 Series wiring where the adapter connected to the
master socket is wired to the first socket, which is wired to the second
socket, which is wired to the third socket and so on (as below). The choice of
which is used will depend upon the position of the master socket and the
required positions for the new sockets. You can mix the two forms as necessary,
possibly using serial wiring to connect junction boxes on each floor, and then
running spurs from each junction box to the socket positions on each
floor.
Print this page
