Fuse Blowing

Not too common, but happens occasionally, are fuse blowing problems on the Mondy. Normally this shows as a complete engine cut out or a failure to start

Fuse 4 Blown

This blade type fuse can blow. Normally this is a sign that the coil feed wiring has not been routed correctly and has fallen onto the EGR valve piping and has melted and shorted. Check the wiring in this area

Fuse 9 Blown

This special 20a blue box fuse feeds all the engine sensors via the PCM relay. This can blow if there is a short to ground between the gearbox casing and the vehicle speed sensor loom. This loom is clamped tightly to the gearbox lifting eye and can easily wear through and short

Its hidden under the air filter which will need to be completely removed to gain access