This one was my second
model built from Balsa craft kit!! Sadly not available. For now(;0)
| Name: | Easy Street |
| Materials: | Wing foam balsa cut out.Fuzz light ply and balsa jig built in China |
| Build time: | Best guess! 10 hours ready to go. |
| Motors | Speed 600 race - Magnetic Mayhem - Kontronic geared 480 brushless - Kontronic 500 direct drive Aviox 1609-4wind. There are loads of motors now, I saw an outrunner from Puffin motors a few weeks ago that on an 11"x7" apc gave a FULL ten minutes of aerobatics direct drive and SILENT!! |
| A.U.W. | 2lbs12ozs |
| 8 cells | 2000sanyo nicad - 2,400 nicad - 3000nimh |
| Venue | Grass just about anywhere! |
| ESC | For standard use any good 30amp bec unit with brushless ?? whatever. |
| Prop | For the standard speed 600 or Mag Mayhem use a radio active 8"x4" Brushless to many choices! |
| Radio: | I use Ripmax sd200's but I reckon the little sd150 would be fine |
http://www.glue-it.com/aircraft/gallery/easy-street.html
Found this on the web!! Nothing to do with me.
My original model lasted for many flights.I let a flightline controller have a go and he spanked it inside 15 seconds!! Lesson learnt if the pilot is not known DO NOT ALLOW THEM TO FLY.