Weights
It is my intention to maintain a record of the weight of the components used during the build. Keeping the weight as low as is practically possible, without spending really silly money is an objective of the build. This page is intended to provide a reference of commonly available parts for other builders.
These weights were measured using a pair of kitchen and bathroom scales, so they are probably not at all accurate, but should give some indication of approximate values.
| Item | Weight (Kg) | # | Total | Cumulative Total |
| Engine (dry incl. AIS) | 62 | 1 | 62 | 62 |
| Diff | 18.5 | 1 | 18.5 | 80.5 |
| Nosecone | 2.8 | 1 | 2.8 | 83.3 |
| Cycle wing | 0.83 | 2 | 1.66 | 84.96 |
| Bonnet | 3.37 | 1 | 3.37 | 88.33 |
| Rear bodywork | 5 | 1 | 5 | 93.33 |
| Fuel tank | 8 | 1 | 8 | 101.33 |
| Front wheel incl. tyre | 9.5 | 2 | 19 | 120.33 |
| Rear wheel incl. tyre | 10 | 2 | 20 | 140.33 |
| Chassis incl. braced roll bar | 62 | 1 | 62 | 202.33 |
| Engine mounts | 1.98 | 1 | 1.98 | 204.31 |
| Chassis cross-brace | 0.68 | 1 | 0.68 | 204.99 |
| Front rocker arm | 1.85 | 2 | 3.7 | 208.69 |
| Front lower wishbone | 1 | 2 | 2 | 210.69 |
| Front upright incl. wing mounts | 3.5 | 2 | 7 | 217.69 |
| Upper ball joint | 0.32 | 2 | 0.64 | 218.33 |
| Lower ball joint | 0.45 | 2 | 0.9 | 219.23 |
| Rear upper wishbone | 1.4 | 2 | 2.8 | 222.03 |
| Rear lower wishbone | 2.85 | 2 | 5.7 | 227.73 |
| Rear upright | 1.7 | 2 | 3.4 | 231.13 |
| Chassis kit nut and bolt pack | 3.8 | 1 | 3.8 | 234.93 |
| Gearlinkage incl. Bolts | 1.1 | 1 | 1.1 | 236.03 |
| Rear hub, bearing and outer tripod | 4.95 | 2 | 9.9 | 245.93 |
| Rear caliper mount | 0.24 | 2 | 0.48 | 246.41 |
| Rear caliper | 2.03 | 2 | 4.06 | 250.47 |
| Rear brake pad | 0.16 | 4 | 0.64 | 251.11 |
| Brake balance bar assembly | 0.21 | 1 | 0.21 | 251.32 |
| Brake pedal | 0.55 | 1 | 0.55 | 251.87 |
| Clutch pedal | 0.6 | 1 | 0.6 | 252.47 |
| Rear brake disk | 3.3 | 2 | 6.6 | 259.07 |
| Front brake disk | 3.75 | 2 | 7.5 | 266.57 |