Memories of the 1960s Broadcasting House Control Room

The front bench and the ATOM's desk in the late 1970s.

---

23rd November, 1978 is a date I remember well because I still have the cheque stub for "performing" that day! All the AM frequencies were being swapped around. The TV programme "Nationwide" was doing a very big thing on it, from BH Control Room. When the director(s) had the opening shot sorted out, it meant that a large area of Control Room looked unoccupied, as the shot was basically facing the C&M's (Control and Monitor positions). There were 6 of these, 3 banks of 2 and they were generally unmanned - more accurately, manned only until an International circuit was up and running satisfactorily. As the "new boy" in the place, having joined LCR from Evesham just a month before, it fell to me to sit at one of the C&Ms and pretend to operate it to make the place look busy! The directors had me rehearsing my arm movement as I twiddled the rotary fader. Then, just before we went live, they decided to move the opening position of the presenter, (Glyn Worsnip I think), such that none of my body could be seen. Only the elbow of my moving arm made it to screen!

Nevertheless I was staff and had performed as requested, so a while later I received my "staff performance fee" cheque, complete with artists number! It was for £6.50. Apparently if I appear again in the future I will have the same number! (I've obliterated it! - RB)

If I remember correctly, the actual frequency changes were made at 23.00 that evening. - Matt Sims.

I was on duty that night, starting at 2230. The TV crew had spent the previous three days rigging the cameras and lighting for the Nationwide OB and when myself and the rest of the nightshift turned up for duty there was not one piece of the OB left in the control room, the entire thing had been derigged in three hours despite having taken three days to rig. I later discovered that the crews got the same money for derigging as rigging! - Ian Taylor.

---

In earlier days than Matt's Control Room story the C&Ms were regularly manned by the most junior Technical Operators. The control positions were not far from the desk of the ATOM (Assistant Technical Operations Manager). One of the ATOMs would look at some junior TO who didn't appear to be busy and mutter the dreaded words: "It's a dry shift!". Getting no response, his utterance would get louder until it was quite obvious that we juniors could no longer pretend to be engrossed by the audio in our cans. "It's a DRY SHIFT!!!" would be the call again. You knew you would have to take the tea and coffee orders from the whole of the 20 or so people in C/R and Cons. Then go to the 8th floor restaurant and, balancing the plastic spoons (real plastic spoons in those days!) on the drinks to help the surface tension to stop them slopping over when the lift stopped on the way down to the first floor, deliver them safely to the thirsty operators. - John Hale

---

The main jackfield, the left hand end of the front bench in the foreground. Late 1970s.

---

Rumour had it that some TOs on the SB (Simultaneous Broadcast) position were being annoyed by an engineer from one of the remote transmitters in Northern Ireland. They hatched a plan. One night shift they wheeled in a TR90 tape recorder to the SB position and set it to record at 7.5 ips. They then rang the poor unfortunate Irishman who answered the EMX with "Hallo" - which was recorded and, with head displacement delay, was fed back to him. It evidently took some while (over the poor quality control line) for him to twig that he was having a conversation with himself! - John Hale

---

After closedown of the Third Programme at about 2330, and leaving another 20 minutes for safety so that remote transmitters would automatically power down, one poor unfortunate operator would go into the Third Programme's Continuity Studio and read out the late amendments to the nationwide line booking schedule for the following day. (No computers, remember!)

It was not unusual for some of the transmitters in fact to remain active and I can remember listening to the wonderful numbers (Manchester 386; out Birmingham 549 to London, etc) coming over my car radio on the way home from evening shift at BH as one of my night shift colleagues was doing his duty! I often wondered what Joe Public thought of these strange sounding football results! - John Hale

---

The TV (Sound) Switching Position. Late 1970s.

---

Behind the C&Ms was a rest area with some chairs where TOs used to enjoy the odd cuppa or catch some shuteye overnight. At the front bench end of these seats was an LS5/8 speaker which was fed from the EMX monitoring and it normally faced the EMX operator. Nightshifts were tiring and occasionally a TO would fail to wake up - what better way to wake them than with their very own alarm...the chimes of Big Ben with the Quad amp on the 5/8 turned up full. It never failed! - Mark Smith

---

Other nightshift memories include marathon Monopoly sessions and a bizarre night when two colleagues (let's call them John and Simon) brought in some home grown tomatoes to share with A shift. This was fine until we thought it would be a good idea to conduct an experiment. John took a slightly over-ripe tomato to the 9th floor of BHX and Simon went down to the basement. The tomato was dropped down the stairwell...and probably reached its terminal velocity just before Simon tried to catch it...only it exploded all over his face! - Mark Smith



We actually ran a race starting from about the 3rd Floor, John ran up with the large, overipe tomato and I ran down to the basement. John obviously arrived at the 9th floor slightly ahead of me because as I reached the bottom of the stairs and put my hand out, I just looked up in time to attempt to catch the tomato. Unfortunately it exploded on my hand and I was showered in pips and skin! - Simon Edwards

---

On another night shift (the same week as the tomato incident I think!) we tied another member of A Shift (Mike B.) to a chair using double enders and put him in the main BHX lift. He went up and down several times before he managed to free himself! Apparently the other passengers who saw him thought it was very funny, but did nothing to free him. - Simon Edwards

---

Our TOM, George M., taught me how to tie a knot in a double ender using just one hand. It was a skill he had learnt to do in the old sub-basement Control Room from the balcony, using an 18ft cord! Due to the lack of a balcony I had to settle for a 6ft cord. It took me a fair few night shifts to master, but I can proudly say it is a skill I still have.

A favourite trick to play on new TOs was to plug up the EMX on the bay near the OB position, such that when one 'ring' key was thrown on OBs the entire EMX switchboard on the front bench lit up! The only way to get rid of the lights was to laboriously go through every single one and clear it which meant two or three key throws/pushes for each circuit!

One of the stories of the 1940s Control Room tells of a lady who accidently threaded a double ender through her bag and had to leave it there. I remember doing the same thing deliberately to one of my colleagues, but using a very long cord and threading it through his jacket while he slept! He had to leave the jacket there and collect it the next night.

They all seemed like good ideas at the time!! - Simon Edwards

---