FUEL RAIL MODIFICATION CLICK PHOTOS TO ENLARGE
The fuel rail is the standard Ford item, modified to provide a fuel return. The first job was to remove the damper from the centre of the rail and then to fit -6 fittings to either end of the tube. Once this was complete the brackets were modified to accomodate the different sized injectors. However once we did this we had a problem with the return line fitting, clashing with the idler pulley so this had to be removed and reweleded at a 90 degree angle. Finally the fuel rail was powder coated in black.
The modified fuel rail fitted to the engine.
The fuel regulator fitted using a home made bracket below the coil pack. Fuel pressure has been set to 3 bar.