ENGINE DISMANTLING CLICK PHOTOS TO ENLARGE
A bare duratec block with head, crank, pistons and rods removed. There are no modifications to the block itself so this just needs a clean up and we are ready to rebuild.
A shot showing the crank ladder but with the crank removed.
The standard oil pump which will be reused so remains in position.
The head as removed from the engine. Again there are no modiciations to be done so the std valves are retained in position. We could do a little bit of headwork but the head flows so well as standard that it is not really necessary unless oyu are going for high levels of power.
The head with cams removed. The followers are individually sized so we have been careful not to remove them from their positions.